Futaba USB Devices Driver

Posted on by



PPM2USB is a simple circuit which decodes a PPM-Signal from a R/C (Radio Control) transmitter and emulates a USB-Joystick.
  1. Futaba Usb Devices Driver Updater
  2. Kinds Of Usb Devices
  3. Futaba Usb Devices Driver Download
  4. Futaba Usb Devices Driver Adapter

USB Interface for Communication Between Link-Supported Devices (01102291-1). Taiwan Futaba Electronics Corporation No. 1, Shin Kai Fa Road, Nan Tze Export Pocessing Zone, Kaohsiung, Taiwan 81170 +886-7-3612321 ericswang@tw-futaba.com.tw.

The USB side of the adapter behaves like a standard USB joystick (HID-Device).Therefore you don't need a driver for Windows or Linux (tested with Windows XP, Windows 7 and Ubuntu 9.10).In Mac OS it should work well too, but this is not yet tested.The adapter is ideal for use with a model aircraft simulator on the PC.

PPM

Most R/C remote controls provides a so-called PPM-signal.It consists of a pulse train with about 0.4 ms long pulses.The time interval tn between the pulses corresponds to the stick-positionof each channel. A time of 1.5 ms corresponds to the center position,1ms is the minimum and 2ms is the maximum position.A pulse train consists of n+1 pulses - for 5 channels thus 6 pulses. The pulse train is repeated every 20ms (50Hz).

  1. Oculus ADB Drivers Published 2019-09-04. Oculus ADB Drivers 2.0. This download contains the drivers required to use ADB with Android-based Oculus devices.
  2. Usb driver download - Best answers Download usb driver - Best answers Spvd-012.1 usb driver for windows 10 - Forum - Drivers.
  3. Right click the icon'FT232R USB UART' and then click 'Update Driver software.' Driver installation (Using Windows 7 as an example) Turn on your PC power and boot Windows 7. When your CIU-2 is connected to the USB port on your PC, 'Installing device driver software' appears on the screen.

Bild 2: The PPM signal of a remote control with 5 channels

On my R/C transmitter, the PPM signal can be found at the trainer port.The pinout of the 4-pin. Mini-DIN connector is shown in Bild 3.

Bild 3: pinout of the trainer port on the Esky Remote

An overview of the pin connection for the trainer jacks of other manufacturers (including Graupner, Robbe, Futaba, Multiplex, Hitec)can be found here: Pinouts of various R/C transmitters

Hardware

Bild 4: The schematics of the PPM2USB adapter

The circuit is quite simple and can be build on a breadboard or on a perfboard.The resistors and Zenerdiodes provide the USB-required voltage levels.The PPM signal is connected directly to the ICP-pin of the ATmega8.This works with signal levels from 1.5-5V.For the right timing an external 12MHz crystal is used.

Futaba Usb Devices Driver Updater

Note: The ISP circuitry for programming the controllerwas left in the schematic way.

PPM2USB with USBASP-Hardware

It is also possible to modify an USBASP-Dongle: USBASP to PPM2USB-Modification.

Software

The software was developed with the AVR-GCC tool chain and consists of three parts:

PPM decoder

The PPM decoder is completely interrupt driven.To measure the time, a 16 bit timer is used which is directly connected to the CPU clock (12MHz).

USB stack

The ATmega8 has actually no USB interface. However, it is possible to implement such in software.For this purpose the free USB stack called V-USB is used.

Main program

In the main program V-USB is initialized. Then the controller goes into ainfinite loop and transfers new joystick positions to the PC. It will only transfer data when the stick positionshave changed. This is indicated by brief flashes of the LED.

Download

  • The included hex file is compiled for a ATMega8. The source code can be easily adapted to other AVRs (if they are supported by V-USB).
  • For programming, the described programming cable can be used.
  • Fuses: external crystal (lfuse: 0xEF, hfuse: 0xC9)
  • You may not use this work for commercial purposes
  • Projekt-Download, Git-Repository

Flying-Model-Simulator FMS

For simulating model airplanes you can use the Free Flight Model Simulator (FMS).

Video 1: FMS test flight with A380 and Quadropcopter using the PPM2USB-adapter

Futaba usb devices driver adapter
Tags: usb rc simulator interface ppm cable cable pinout pinout adapter joystick trainer model making v-sub pcm RC USB Atmel AVR Mikrocontroller Projekte Projekt uC diy selbstbau tutorial µC selbstgebaut schaltung schaltplan schema bauplan bauanleitung schematic programmierung elektronik controller embedded Atmega8 Atmega32 arduino bascom avr-gcc avr studio atmega microcontroller isp

This tiny driver utility quickly searches your system for connected hardware. It identifies many different connected devices and also includes hardware which has been marked as 'Unknown' in the device manager.

Kinds Of Usb Devices

It gives you a little bit more information about a certain device so that you can find the proper drivers required to get it up and going in Windows.

Unfortunately when we tested an older scanner we thought was heading to the dustbin, it was configured that our old scanner would probably never work any newer version of Windows.

In short, this is a small tool which may help you figure out whether there are drivers available for your potentially outdated device.

Futaba

Good luck!

Features and highlights

  • Identifies USB 1.1/2.0/3.0 devices
  • Identifies IEEE 1394 devices
  • Identifies ISA Plug&Play devices
  • Identifies AGP Bus devices
  • Identifies PCI, PCI-E, eSATA devices
  • Find drivers for hardware devices
  • Contact hardware vendor directly from app

Unknown Device Identifier 9.01 on 32-bit and 64-bit PCs

This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system on a laptop or desktop PC from drivers without restrictions. Unknown Device Identifier 9.01 is available to all software users as a free download for Windows.

Futaba Usb Devices Driver Download

Filed under:

Futaba Usb Devices Driver Adapter

  1. Unknown Device Identifier Download
  2. Freeware Drivers
  3. Driver Identifier Software